|
Device Testing
Overview of the HMM+™ Test:
The Barth Model 4702 HMM+™ system was designed to eliminate the common problems that are found in gun testing for device level testing. Our carefully designed measurement hardware maintains accurate waveforms throughout the test system and provides accurate measurements of the stress applied to the DUT.
Requirements Of The HMM+™ Test:
The test system is intended for testing the pins of interface devices, the pins that go to the outside world. When you send a device in for testing, include a pin out of the device as well as a list of what pins need to be tested.
- DIP Packaged Device - Pin-out and numbers of pins to be tested indicating
(+) and (-) pins.
Process Of The HMM+™ Test:
Devices will be tested in an unpowered state and failure will be determined by a change in leakage current measured after each stress pulse. If you are currently testing for device failure with another method, please contact us to discuss further, so that we can fully understand your process and determine how we might be able to accomplish your test goals.
Contact us to find out more!
|
|
|
|
Fax: 702-293-7024